Member since: 2020
Nijverheidslaan + 50/56 | 8540 Deerlijk | Belgia | www.batterysupplies.be/en
At Battery Supplies we assemble each traction battery custom for the customer. For this we have our own team of dedicated technicians who are responsible for the installation of traction batteries every day. Over the past year, more than 120,000 traction cells found their way from Battery Supplies to the customer.
One of our warehouses is filled to the brim with traction cells, cases and all accessories. This way everything can be assembled quickly and according to the customer’s wishes.
Before shipment, the battery is measured and checked to have the correct voltage, capacity and water & acid level. If necessary, they will get a little more clotted, because we insist that our batteries arrive ‘spic and span’ at the customer.
Battery Supplies is thé partner for forklift batteries.
A whole team is ready to put together a custom battery for you. All necessary elements are first picked and then taken to 1 of the 4 assembly units. There the battery is assembled by an experienced employee who places the cells in the container through an ergonomic crane. In the next step, the cells are connected to each other, the automatic water filling system and the appropriate connector installed.
Our warehouse is always filled to the brim with all containers, 2v battery cells, filling systems and all accessories you can think of for traction batteries.
In this way we are able to get everything to the customer tailor-made and fast. You only need to provide the necessary information (dimensions, technology, filling system, voltage, capacity, …) and we will do the rest!
Battery Supplies also has a special Quality Control service. Here, defective or poorly performing traction batteries of a forklift truck can be checked and repaired or replaced. Also traction batteries which had an ‘accident’ (for example: losing much electrolyte or sulphation) can in most cases be brought back into workable condition.
Our Battery fix system allows us to renew old batteries. Whether it concerns batteries for drills, shaving apparatus, hand vacuüm cleaner, electric bicycles, rechargeable toothbrushes, dive lights, toys, mobile telephones, laptops, cell phones, cameras, etc.
The principle :
Every cordless device has its own model of battery, in this housing are welded rechargeable battery cells.
We keep the housing of the battery and open it, replace all old battery cells with new high-quality battery cells. We screw or glue the housing back in place and you have a new battery pack in the existing housing!
This saves a lot of money: sometimes up to 50% cheaper compared to the price of a new battery pack & even better for the environment too!
We have our own service department for repairing and maintaining (traction) batteries and industrial chargers. We can perform capacity tests on batteries, regenerate them, and much more. We can do these services at Battery Supplies in the workshop or with the customer on site. The electronic department specializes in repairing all types of chargers: traditional or high-frequency chargers. Our technicians are ready for you!
A well-maintained battery has a longer lifespan
It is time-saving for you
An improperly maintained battery can lead to very dangerous situations
Defects and / or problems are detected faster
Trukki: 0 Koneet
Liitteet: 0 Koneet
Henkilönostimet: 0 Koneet
Siivouskoneet: 0 Koneet
Akut: 1 Koneet
Latauslaite: 0 Koneet